![]() ![]() Seatools, booting from CD, does its system scan and doesn't recognize the drive. Acronis Disk Director 11 update 2 recognizes the drive, allow me to initialize and format it, and shows that it is "healthy" as a basic, primary volume. The BIOS and system POST recognizes the Seagate drive. I'm testing each drive by connecting only one of them at a time to the motherboard. I wanted to test each of the new NAS drives before installing the OS. And whatever opinion respondents have of the Seagate drives, I've had no problem at all with these NAS drives in the WHS server. I purchased two new Seagate NAS 2TB drives for the build, anticipating that I'd move the existing four drives of the WHS system to the new server eventually. Today, I fired up the system for the first time after fretting over fan connections, airflow, cable-management, etc. It may sound sort of hinky - not buying a "server motherboard" or a Xeon processor - but I'm using an i5-3470 processor and a spare Z68/Gen3 motherboard fitted with 16GB of (non-ECC!!) XMS RAM. For the OS - Win Server 2012 R2 Essentials. I'm building a server to eventually replace my WHS-2011 configuration. See the examples listed below to help you find the serial numbers for different models:Ĭaution: Please Safely Remove, then physically disconnect and power down your drive before looking for the serial number.I may have several question in more than one forum that begins with this paragraph: Note: For certain products, the model number is no longer included on the product label. If you wish to enter or scan the QR code, please visit: Verify my drive link. This code allows our customers to verify if the product is genuine, it provides the ability to check warranty or to get more information about the drive. Each QR code is unique and is associated with that drive S/N. Some of our drives have the QR code printed on the label (see example below). If your drive is not detected or connected to your computer: The USB devices have the serial numbers printed on the external cases and internal drives have the serial and part numbers on the drive labels. The serial and/or model number will be listed here.You should see the drive information listed in the center at the bottom.In the middle window, locate the drive and select it.In the left-hand column under Hardware, locate the interface you are using (i.e.A separate Window will open with the Mac information Select System Report/System Information (depending on your version of Mac OS).Depending on your version of Mac OS it may be required to click on More Info.Click on the Apple Icon (located in the upper left-hand, then select About This Mac.If the drive is connected to your Mac, you can use the Apple System Profiler to determine the model number and serial number. Note: The Drive Detect tool and SeaTools are not compatible with LaCie drives. You can also use SeaTools to display each number. Use the DriveDetect.exe method to find both numbers. If your drive is connected to your computer: Seagate has created a very simple tool that will tell you the serial number and the model number of any and all Seagate, Samsung and Maxtor-brand drives connected in or to your computer. Your product serial number is a unique identifier that allows us to look up information about your product and its warranty. Instructions to find a serial number (S/N) on the Seagate, Samsung Maxtor and LaCie drives. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |